News
R&M Introduces Cabling for the Digital Office Ceiling
May 2017 by Marc Jacob
R&M supports initiatives for the digital office and room ceiling. The aim of these digital ceiling initiatives is to integrate the ceiling infrastructure into local data networks. Sensors and controls for lighting, air conditioning and surveillance could be networked more simply and safely with building services engineering and the Internet of Things. Functions and services that in the past have been run separately could now be brought together for the first time in the data network. This would make it possible to automate office and building operations. There are already energy-saving, smart LED ceiling lights available on the market featuring intelligent sensors and a data network connection.
For example, R&M is supporting the combination of data connection and power supply for LED lighting with an incredibly low amount of cabling. The LED lights are fed with power via the data cable – referred to as Power over Ethernet (PoE) – and at the same time obtain their own IP address in the LAN. Surveillance cameras, smoke alarms, temperature and motion sensors or WLAN antennas on the ceiling could be integrated in the Internet of Things in the same way.
The R&M U-Box is the core of these solutions. The multifunctional, flat distributor housing can provide up to 24 data network or PoE connections. "But Power over Ethernet will not be enough in the digital ceiling. High-power end devices, such as digital ceiling switches, that need greater power are coming onto the market. And that changes the requirements fundamentally. In the future we are going to be needing an adequate 230-Volt power supply as well as structured LAN cabling in the ceiling," says Matthias Gerber. In such cases, ceilings can be accessed with the R&M U-Box as it can accommodate not only the LAN connections but also the connections for the 230V power supply.
In conventional planning, the number of LAN connection points in the ceiling is not usually enough. The tried-and-tested star cabling based on a central floor distributor was developed particularly with work area access in mind. But these connections are normally in the wrong place when it comes to connecting building infrastructure applications. This is why R&M recommends positioning small ceiling distributors, called service outlets (SO), compliant with EN 50173-6 at regular intervals in all rooms. To reduce the need for star cabling, an active zone switch can be positioned next to the SO point. These can take care of LAN cabling and PoE power supply in their relevant zones.
The digital ceiling solutions provided by R&M are paving the way to a plannable development of the ceiling – both for IP-based intelligent building automation and for WLAN access using structured cabling. The combination of data network and 230V power supply on one platform has been a specialty of R&M for many years, and is now finding a new application. R&M uses approaches from data cabling and work area access which have been proved millions of times over and can be adapted to suit any particular scenario.
?
